Hemp Oil is one of the easiest and most beautiful finishing oils. From old reclaimed wood to freshly milk painted pieces, this oil is water resistant and provides a subtle sheen.
• Food Safe • No Chemicals • NO VOC’s
• Breathable• Biodegradable • 100% Natural Hemp seed
This oil does not leave a surface film that will chip or scratch and it does not need to be cut with any solvents or driers.
Hemp oil will darken and richen the wood with a soft lustre. Generally the older the wood the more it will darken it. This will vary based on the type of wood and the age of the wood. It is highly recommended to try a small amount on an area to find out how your project will look with this application.
This hemp oil comes in two sizes: 250 ml and 500 ml
Custom orders of gallon sizes are available - please email us at firstname.lastname@example.org for more information.
How to Use:
Apply a liberal amount onto bare wood with a brush, cloth or by hand and remove excess within 12 hours with a buffing rag. The wood will absorb what it needs, if all is absorbed you can add more, if the oil is just sitting on the wood, then the wood is fully saturated and does not need more coats.
Dries to the touch within a few hours.
Cures in a few weeks.
This oil does not contain solvents which is why the drying time is longer. You can gently use your surfaces while it is curing.
As needed. If the wood looks dry you can always add more.
Great Uses for Hemp Oil:
Used inside, this food-safe oil finish is perfect to use in the kitchen on wooden cutting boards, wooden utensils or stone. Also provides a wonderful finish for flooring * Not recommended for areas with a lot of water, such as a bathroom, kitchen or front door area unless special care is taken and extra applications are applied*
This solvent-free oil finish provides a protective, water-resistant surface. It penetrates to protect from the inside out. It can be used on new wood that is bare, stained, milk-painted or to revive old wood effects. This oil does not leave a surface film that will chip or scratch. This oil does not need to be cut with any solvents. Since there are no added solvents or dryers to this product, the drying time is longer. The oil will feel dry to the touch one day after the initial application, however complete drying can be several days. For example if there is too much oil initially applied, then small amounts of oil may rise over the first few days. This can be avoided by wiping the excess away with a cloth. If used on a floor during this time it is recommended to place some cardboard pieces where there will be a lot of foot traffic. Dirty shoes should be kept off for at least two weeks.
Great for those that suffer from chemical sensitivities and can not use solvent based products. The odour of this oil is much like crushed walnuts.
Not recommended for exterior use. Please see Tung Oil for exterior applications. This oil does not contain UV protectors, therefore the wood will age, darken and grey.
This oil is a great environmentally friendly product as the hemp seeds are grown and pressed in Ontario.
250 ml - Covers aprx 40 square feet
Coverage will vary taking into consideration what the oil is being applied to. For example, a previously oiled surface will require very little oil, where as bare wood will require more.